Description
SPECIFICATIONS
Brand Name: Stlxy
Origin: Mainland China
Hign-concerned Chemical: None
DIY Supplies: ELECTRICAL
Display Size: 3.0 - 4.9 Inches
Model Number: PWM XY-PWM1
PWM Pulse Frequency Adjustable Duty Cycle Square Wave Module Rectangular Wave Signal Generator XY-PWM1
Module stressed:
1. The dual mode,the duty cycle is 0.1% good model;
2. The frequency and duty cycle,LCD LCD is very clear,using encoder potentiometer to adjust,very convenient;PWM output frequency and duty cycle can be set separately;
3. The lock function,prevent wrong operation;
4. The duty cycle of the upper and lower limits can be set up;KPWM switch,and PWM output can be turned on and off a key;
4. The wide frequency range and high precision;
5. Serial communication is possible
1. The module is described
PWM output,frequency and duty ratio can be separately;
Normal mode:
Frequency range 1 hz ~ 000 ~ 150 KHZ duty cycle,duty ratio 1%
Good mode:
Duty cycle 1 hz to 15 KHZ range of 00.0 ~ 0.1% duty cycle
Is divided into four frequency range,automatic switch:
1. XXX (no decimal point) : a small unit is 1 hz,value range is 1 hz ~ 999 hz.
2. X.XX (decimal point in the hundreds),small unit 0.01 KHZ,and the value range is 1.00 KHZ to 9.99 KHZ.
3. Xx.Decimal point X (10) : a small unit 0.1 KHZ;Values range from 10.0 KHZ to 99.9 KHZ
4. 7.0.x.x.X (decimal point in dozens,hundreds of) : a small unit 1 KHZ;Range of values is 1 KHZ to 150 KHZ
Such as frequency display: 100 means that the PWM output 100 hz pulse;
1.01 means 1.01 k PWM output pulse;
54.1 54.1 KHZ PWM output pulse means;
1 means that the PWM output 124 KHZ pulses;
Duty cycle range of values: 0 ~;
All save the parameter set to turn it off.
2. The parameter Settings
This product adjust the frequency and duty ratio through rotating potentiometer,which can be adjust according to the speed fast.Default adjustment cycle,short according to adjust the frequency,by 2 seconds long locks,long press 5 seconds to switch modes (normal mode/fine mode),simple operation,automatically saved after parameter setting,not lost.
3. The module parameters:
1. Working voltage: 3.3 ~ 30 v.
2. The frequency range: 1 hz ~ 150 KHZ normal mode;A good pattern 1 hz to 15 KHZ;
3. The frequency accuracy: precision in every range of about 2%;
Load capacity: 4. The signal can be about 5 ~ 30 ma output current;
5. The output amplitude,pulse width modulation amplitude is equal to the power supply voltage;
6. The environment temperature: - 20 ~ + 70 ℃.
7. Weight: 42 grams
4. The scope of application:
1. As a square wave signal generator to generate square wave signal experimental development;
2. Used to produce square wave signal,control motor drive;
3. Generate MCU with adjustable pulse;
4. Generate adjustable pulse control related circuit (application of PWM dimming,speed,etc.).
5,a serial port control (single chip microcomputer TTL level communication)
Serial control (single chip microcomputer TTL level communication)
Communication standard: 9600 basis points
Data bits: 8
Stop bits: 1
Check digit: no
Flow control: no
A serial port command |
instructions |
read |
Read the parameter Settings |
in |
Open thePulse width modulationThe output |
from |
Shut downPulse width modulationThe output |
DNxxx |
Set the duty ratio limit DNxxx:Set the normal mode DNxx. X:Set the fine mode |
UPxxx |
Set the duty ratio limit UPxxx:Set the normal mode UPxx. X:Set the fine mode |
MODEx |
MODE0:Normal mode Model:Fine pattern |
Fxxx |
"F101" :Set the frequency for101 hz (001 ~ 999) "F1.05" :Set the frequency for1.05 KHZ (1.00 ~ 9.99) "F10.5" :Set the frequency for10.5 KHZ (10.0 ~ 99.9) "F1.0.5" :Set the frequency for105 KHZ (1.0.0 ~ 1.5.0) |
Dxxx |
Normal mode:'DXXX:" XXX (001 ~ 100) For example,D050To set upPulse width modulationThe duty ratio is50% Fine pattern:'DXX. X" : XX. X (00.1 ~ 100)For example,D20.8,Set up thePulse width modulationThe duty ratio is 20.8% |