Description
SPECIFICATIONS
Brand Name: NoEnName_Null
Camera Mount Type: Fixed Camera Mount
Material: Carbon Fiber
Controller Battery: as show
Origin: Mainland China
Indoor/Outdoor Use: Indoor-Outdoor
Video Capture Resolution: other
Remote Distance: as show
Aerial Photography: Yes
Controller Mode: MODE1
Controller Mode: MODE2
Control Channels: 8 CHANNELS
Package Includes: Original Box
Recommend Age: 12+y
Remote Control: No
Model Number: Mobula6
State of Assembly: Ready-to-Go
Flight Time: as show
Type: HELICOPTER
Dimensions: as show
Warning: as show
Charging Voltage: as show
Motor: Brushless Motor
Warranty: as show
Charging Time: as show
Plugs Type: as show
Power Source: Electric
Happymodel Mobula6 65mm Crazybee F4 Lite 1S Brushless Whoop FPV Racing Drone BNF
Specification:
Brand Name: Happymodel
Model: Mobula6
Item Name: 65mm Crazybee F4 Lite 1S Brushless Whoop FPV Racing Drone BNF
Optional Version: Frsky Receiver ( Compatible with ACCST D8/D16, Recommend D8 mode)
Flysky Receiver ( Compatible with AFHDS and AFHDS-2A Flysky transmitter)
Drone Wheelbase: 65mm
Specification:
Brand Name: Happymodel
Model: Mobula6
Item Name: 65mm Crazybee F4 Lite 1S Brushless Whoop FPV Racing Drone BNF
Optional Version: Frsky Receiver ( Compatible with ACCST D8/D16, Recommend D8 mode)
Flysky Receiver ( Compatible with AFHDS and AFHDS-2A Flysky transmitter)
Drone Wheelbase: 65mm
Size: 80x80x37mm
Weight: 20g
| Crazybee F4 LiteFlight Controller Built-in ESC & Receiver & VTX |
Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC
Built-in voltage detection
|
| Onboard Frsky Receiver Version |
SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model
- Frsky_x_lbt Support EU LBT Radio Transmitter Channels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
|
| Onboard Flysky Receiver Version |
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support
|
| Onboard 5A BLheli_S 4in1 ESC |
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600
|
| SE0802 19000KV / 25000KV Motor |
Model: SE0802
KV: 19000KV / 25000KV Motor Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.9g
No.of Cells(Lipo):1S only
|
| Gemfan 1219 3-Blade Propeller |
Brand Name: Gemfan Center Thickness:5mm
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
Quantity: 4 CW & 4 CCW Weight:0.28g
|
| Onboard 5.8G 40CH 25mW VTX | Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready |
| Runcam Nano 3 FPV Camera |
Brand Name: Runcam Model: Nano 3 Item Name: 1/3 CMOS 800TVL Camera Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
FOV: 120 degree Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
|
| Lipo Battery ( Not Included) |
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 8g
Connector: PH2.0
Quantity: 4 PCS |
Pacakge Included:
1x Mobula6 1S FPV Racing Drone
1x 1S Lipo/LIHV USB Charger
1x Propeller disassemble Tool
No include battery,
1S 300mAh 30C Lipo Battery for Mobula6 1S FPV Racing Drone
