JDS6600 Dual-channel Function Signal generator combines multiple functions in one, such as Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Sweep, Counter and Frequency Meter, etc.
The instrument adopts the Direct Digital Synthesizer(DDS) technology and provides stable, precise, pure and low distortion signals. It's a great testing or measuring instrument for electronics engineers, electronic laboratory, teaching and researching.
Feature：
1. 320*240 2.4" TFT color LCD display, simultaneously display parameters of CH1 and CH2.
2. Use soft silicone keys instead of traditional patch keys, high sensitivity and convenient for operation.
3. JDS6600-15M, the maximum sine wave frequency is 15MHz, and the maximum square wave is 15MHz, 266MSa/s sampling rate and 14bits vertical resolution.
4. 60 groups of arbitrary wave storage function, memory depth of each group is 2048*14bits, can re-call and check custom waveforms, draw arbitrary waveforms.
5. Completely independent dual channels output, synchronizing operation and adjustable phase difference.
6. Duty-cycle of each channel can be adjusted independently, the adjusting resolution is 0.1%.
7. High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01uHz.
8. High amplitude resolution: the minimum amplitude resolution can reach 1mV, amplitude range is 2mVpp~20Vpp.
9. Sweep function: linear sweep and logarithmic sweep functions; 0.1s-999.9s sweep time; forward, backward and roundtrip sweep directions.
10. Pulse trains burst output function: allow the unit output 1~1048575 arbitrary pulse trains.
11. Measurement functions: can measure signal frequency, cycle, positive/negative pulse width and duty cycle; 1Hz~100MHz frequency range.
12. -9.99V~9.99V DC offset range, offset resolution: 0.01V.
13. With digital signal output function, CMOS output range 0~10V.
14. Storage feature: can store 100 groups of parameters set by the user and extract at any time.
15. Counter function: with DC and AC coupling modes.
16. Arbitrary wave editing function: user can edit arbitrary wave on PC and then download to output from the instrument.
17. Communication function: the PC can be used to control the instrument.
18. output short-circuit protection: all signal output can work 60s under load short-circuit condition.
Teachnical Parameters：
Sine frequency range: 0~15MHz
Square frequency range: 0~15 MHz
Triangle frequency range: 0~15 MHz
Pulse frequency range: 0~6 MHz
TTL digital frequency range: 0~6 MHz
Arbitrary wave frequency range: 0~6 MHz
Square rise time: ≤10nS
Pulse width adjustment range: 25nS - 4000S
Frequency accuracy: ±20 ppm
Frequency stability: ±1 ppm/3h
|
Frequency characteristics
Model |
JDS6600-15M |
JDS6600-30M |
JDS6600-40M |
JDS6600-50M |
JDS6600-60M |
Sine frequency range |
0~15MHz |
0~30MHz |
0~40MHz |
0~50MHz |
0~60MHz |
Square frequency range |
0~15MHz |
0~25MHz |
0~25MHz |
0~25MHz |
0~25MHz |
Triangle frequency range |
0~15MHz |
0~25MHz |
0~25MHz |
0~25MHz |
0~25MHz |
Pulse frequency range |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
TTL digital frequency range |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
Arbitrary wave frequency range |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
Pulse width adjustment range |
100nS - 4000S |
50nS - 4000S |
40nS - 4000S |
30nS - 4000S |
25nS - 4000S |
Square wave rise time |
≤25nS |
≤15nS |
≤10nS |
≤10nS |
≤10nS |
Minimum frequency resolution |
0.01uHz(0.00000001Hz) |
Frequency accuracy |
±20 ppm |
Frequency stability |
±1 ppm/3h |
Waveform specifications |
Waveform types |
Sine, square, triangle, pulse (duty-cycle correction, pulse width and cycle time adjustable), arbitrary wave, CMOS, DC level, half-wave, full-wave, pos-ladder, neg-Ladder, noise, exponential rise, exponential fall, tone, cink pulse, lorentz pulse, and 60 kinds user-defined waveforms. |
Waveform length |
2048 points |
Waveform sampling rate |
266 MSa/s |
Waveform vertical resolution |
14 bits |
Sine wave |
Harmonic
suppression
|
≥45dBc(<1 MHz); ≥40dBc(1 MHz~20 MHz) |
|
Total harmonic
distortion
|
<0.8%(20 Hz~20 kHz,0dBm) |
Square and Pulse wave |
Overshoot
(Square)
|
≤5% |
Pulse and Partial sine wave |
Duty-cycle
adjustment
range
|
0.1 - 99.9% |
Sawtooth wave |
Linearity |
≥98%(0.01 Hz~10 kHz) |
Output specifications |
Sine wave amplitude range |
Frequency ≤ 10MHz |
10MHz ≤ Frequency ≤ 30MHz |
30MHz ≤ Frequency |
|
2mVpp~20Vpp |
2mVpp~10Vpp |
2mVpp~5Vpp |
|
Square wave,Triangle wave
amplitude range
|
Frequency ≤ 10MHz |
10MHz ≤ Frequency ≤ 25MHz |
|
2mVpp~20Vpp |
2mVpp~5Vpp |
Amplitude resolution |
1 mV |
Amplitude stability |
±0.5%/5 h |
Amplitude flatness |
±5%(<10 MHz); ±10%(>10 MHz) |
Waveform output |
Output impedance |
50Ω±10%(typical) |
Protection |
All signal outputs can work within 60s when the load is short-circuited |
DC offset |
Offset adjusting range |
Output Amplitude>2V |
0.2V<Output Amplitude≤2V |
0＜Output amplitude≤0.2V |
|
-9.99V~9.99V |
-2.5V~2.5V |
-0.25V~0.25V |
Offset resolution |
0.01 V |
Phase specifications |
Phase adjusting range |
0 ~ 359.9° |
Phase resolution |
0.1° |
TTL/COMS Output |
Low level |
<0.3 V |
High level |
1 - 10 V |
Level rise/fall time |
≤20ns |
External measurement function |
Frequency meter function |
Frequency
measurement
range
|
1 Hz~100 MHz |
|
Measurement accuracy |
Gate time continuously adjusted between 0.01S~10s |
Counter function |
Counting range |
0-4294967295 |
|
Coupled mode |
2 Coupling modes, DC and AC |
|
Counting method |
Manual operation |
Input signal voltage range |
2 – 20 Vpp |
Pulse width measurement |
0.01us (resolution), 20s (MAX measuring time) |
Period measurement |
0.01us (resolution), 20s (MAX measuring time) |
Sweep function |
Sweep channel |
CH1 or CH2 |
Sweep type |
Linear sweep, logarithmic sweep |
Sweep time |
0.1s~999.9s |
Setting range |
Arbitrarily set between start point and stop points |
Sweep direction |
Forward, backward and round trip |
Bursting function |
Number of pulses |
1-1048575 |
Burst mode |
Manual burst, CH2 burst, external burst (AC), external burst (DC) |
General technical parameters |
Display type |
Display type |
2.4 inch TFT color LCD |
Storage and load |
Quantity |
100 groups |
|
Position |
00 to 99(extract 00 place data at default boost state) |
Arbitrary wave |
Quantity |
1 to 60, totally 60 groups (default boost 15 groups) |
Interface |
Interface mode |
USB to serial interface |
|
Extension
interface
|
With TTL level mode serial interface for user secondary
development
|
|
Communication
speed
|
Adopt standard 115200 bps |
|
Protocol |
Using the command line,the protocol is made public |
Power supply |
Voltage range |
DC 5 V±0.5 V |
Manufacturing process |
Surface-mount technology, large scale integrated circuit, high reliability, long service life |
Prompt tone |
Users can turn on or off by setting program |
Operating characteristics |
All key operations,knob continuous adjustment |
Environmental |
Temperatire: 0~40℃; Humidity: ＜80% |
|
Package Included:
1 x JDS6600 DDS Signal Generator
1 x CD
1 x Power Adapter
1 x USB Data Cable
1 x BNC-BNC Cable
2 x BNC-Clip Cable
1 x Instruction Manual
|
|
|
