>>>OVERVIEW

The JJC FDA-LED1 LED Light Set includes an LED light, a slide mount holder and a strip film holder, which is specially designed for negative copying and converts film to digital files. The set can be used to photograph 35mm film.

*NOTE: Please double check that you are purchasing a kit before placing an order.

>>FEATURES

【Professional LED Light/Diffuser】

The supplied LED light features 42 built-in ultra-bright LEDs and those LEDs are covered with a screen to produce a soft and even light, thus avoiding hot-spots on your image that are so easy to obtain (and so difficult to avoid) with old-school, cheap, non-optical quality diffusers.

【USB Power】

Requires a 5V-2A USB power adapter(not included) for power suppoly. The daily use of mobile phone Power Bank and Chargers can supply power to the LED light, which is very convenient to use. (Note: If the LED light is not bright enough, it may be caused by the supply current being too small.)

【Perfectly Flat Negatives】

The included film holder keeps negatives flat, giving your camera the best possibility of getting a high resolution digitization image.

【Consistent Positioning】

The ‘film holder’ make it SO easy to obtain consistent relative positioning to lessen the pain in post processing of your images.

【Super-quick Setup】

The design facilitates super-fast setup of the film holder, so you’ll spend more time digitizing than aligning!

【Highly Affordable】

A small fraction of the price of other high-end solutions!

【Wide Range of Applications】

1. Suitable for professional film photography: It is recommended that you shoot with a medium format camera and a macro lens.

2. Suitable for amateur shoot: You can also shoot with your phone.

>>>LED LIGHT

Net Weight: approx. 73g

Dimension: 71 x 91.2 x 52.8mm / 2.8 x 3.6 x 2.1"

Material: ABS

LED Quantity: 42

Color Rendering Index(CRI): 95+

Color Temperature: 6500K

Illuminance: 10cm / 3.9" , 6392lux; 20cm / 7.9", 1473lux; 30cm / 11.8", 988lux

Brightness: 10 levels

Power Draw: 7.5W

Interface: Micro USB

Cable Length: approx. 1.5m / 4.9'

>>>Q&A

Q1: How do I convert my negative images into positive images?

A1: here are plenty of different methods for inverting negatives in Lightroom or Photoshop (or in many other image editing packages).Our recommendation is to use a Lightroom plugin called "Negative Lab Pro". Or you can use the following sites for a faster conversion: lomography"point"tools.

Q2: How about light scattering? Have the LEDs been checked and are there particles in the matte diffuser?

A2: The matte diffuser above the LED lamp bead makes the light soft and uniform, and the light scattering effect is excellent; Our products have passed multiple quality inspections before leaving the factory, and the quality is worthy of your trust! There are no particles in the matte diffuser, which will not affect the softness of the light.

Q3: How much bright light is there? What exposure rate and aperture should be installed?

The brightness of the LED light is 6392 lux (10cm/3.9 "), the color rendering index (CRI) is 95+, the color temperature is 6500K, and the brightness is sufficient; the shooting parameters are adjusted with the brightness of the LED light, and a small aperture is recommended.

Q4: Must I cut off the photo tape to use this item?

A4: This product only supports 35mm film or slides. Please check your photo size before purchasing.